Monday , October 22 2018
Home / Mods / Asmodus Minikin V1.5 TC 150W Review

Asmodus Minikin V1.5 TC 150W Review

Recently ASMODUS just released the new Minikin V1.5 which is in 150Watt and all range support on temperature control wire! Before we have a close look on this new Minikin v1.5, let we talk something of the incident of Minikin v1.

The story actually is quite short to understand, ASMODUS Minikin v.1, Helve and Snowwolf 75W was contract manufacturing in China, after the hot selling of ASMODUS product on worldwide market, the manufacture in China decide to production the extra ASMODUS products and selling in the market. ASMODUS has the full Copyright of their products in USA, however not in China, the trademark in China is also very complicated and difficult to process as well. Because this vulnerability to cause the occurrence of the whole event, the market is full of clone Minikin v1, Helve and also the so called Snowwolf 90W (ASMODUS never release any Snowolf 90W officially).

For more information and detail of this incident, you may refer as below news from ASMODUS:

➨ ASMODUS Official Announcements

asmodus-clone

So that is the story of this incident, as a ASMODUS supporter, we Smash Vape believe when you purchase a original product from any kind of company, that is not just simply because the quality, it is also about the after sales service, we believe ASMODUS is doing perfectly well in this part to giving high quality support in after sales service, so that is no reason just because saving a little bit money and go for the CLONES.

— Product Features —

The Minikin V1.5 has structural improvements (to the body itself) that create a firmer, higher quality body that creates a heavy-duty feel as well as providing extra solidity and stability to the mod. The Minikin V1.5 retains the full bodied removeable battery door, which has truly has become quite the crowd favorite, but partnered with the Minikin V1.5’s upgraded body structure, the door fits tight as a glove yet retains its ability to swap out batteries with maximized simplicity. A mini USB port has been implemented to grant the capability to charge via USB if preferred by the user.

The Minikin 1.5 also features improvements in its functionality with an updated screen that displays the individual charge of each battery that is being used by the mod. This update shows the user if a battery is being used more than another. This can happen if batteries have not been “married” (purchased together and used together solely) but this new technology, you can quickly view and resolve the situation.

The Minikin V1.5 also allows the user to manually adjust the resistance that is read from the atomizes with ease. The V1.5 also features newly implemented TCR and TFR options to further enhance its performance. With TCR (Temperature Coefficient of Resistance) you are able to manually adjust the resistance that is read with your particular coil or build so you will always hit at your desired resistance depending on your build.

With TFR (Temperature Factor of Resistivity) mode the Minikin V1.5 permits the user to use hybrid builds that have a mix of wire types safely and can be adjusted based on user preference. Both TCR and TFR functions have 5 memory storage modes each to quickly switch between different settings with a few clicks through the menu.

The Minikin v1.5 retains all the same hyper power saving capabilities as its predecessor which boost your two battery mod to feel like it has a three battery capacity with the same adorable size. Batteries of at least 30 amps are required to make these power saving and power boosting functions work at their full potential.

— Acceptable Wire Types—

asMODus is proud to announce the resurrection of the Minikin with the vastly improved Minikin V1.5! The Minikin 1.5 features a power output of 150 watts (increased from the previous 120 watts) as well as structural and functional improvements. The Minikin V1.5 can handle a vast array of wire types; more than you probably even thought were available! Here’s a list of acceptable wire types in the Minikin V1.5:

  • Alloy 120: Precision Resistance Alloy 120 has been used in thermometer bulbs and other applications that require high temperature coefficient of resistance. It has a temperature coefficient similar to nickel and twice the resistivity. The slope of the temperature resistance curve is almost straight from -70° to 600° C (-94° to 1,112° F).
  • Alloy 52 : Alloy 52 is a controlled expansion alloy, consisting of 51% Nickel, balance Iron
  • Gold
  • Invar36: also known as FeNi36, is a nickel-iron, low-expansion alloy containing 36% nickel. It has a low coefficient of expansion from cryogenic temperatures to about 260℃.
  • Kanthal A1 APM (Non-TC, please see note below): Kanthal APM is an advanced powder-metallurgical, dispersion-strengthened, ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1425°C (2600°F). The alloy is characterized by exceptionally good form stability and oxidation resistance. Kanthal APM has low tendency to ageing and low resistance change. It has excellent surface oxide properties, which gives good protection in corrosive atmospheres as well as in atmospheres with high carbon potential, and no scaling. (Note this is not the same as Regular Kanthal)
  • Kanthal AA EAF {Non-TC, please see note below): Or Kanthal AF is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1300°C (2370°F). The alloy is characterized by excellent oxidation resistance and very good form stability resulting in long element life.(Note this is not the same as Regular Kanthal)
  • Kanthal D (Non-TC, please see note below): Kanthal D is a ferritic iron-chromium-aluminium alloy (FeCrAl alloy) for use at temperatures up to 1300°C (2370°F). The alloy is characterized by high resistivity and good oxidation resistance. (Note this is not the same as Regular Kanthal)

In regards to Kanthal A1 APM , Kanthal AA EAF , and Kanthal D

The Temperature Control function will not work for these modes.

Those wires are meant to run at a much higher temperature than the device or any other vaping device can handle to accurately scale for temperature control.

We apologize for any inconvenience and misinformation that this has caused to the vaping community.

We apologize for the mistake and are currently working on fixing this issue.

— Features —
  • Powered By Two High Amp 18650 Batteries (Sold Separately)
  • Wattage Range: 5W – 150W
  • Resistance Range: 0.1Ω – 2.5Ω
  • Temperature Range: 100°C – 300°C / 212°F – 572°F
  • Temperature Control Functionality
  • Compatible With Many Different Wires
  • Hyper Energy Saving Capability
    • Prolongs Battery Life By Approximately 15%-30%
  • Micro USB Charging Capability

— What Inside The Box —

minikin-150w-01New packaging design for AMODUS MINIKIN 150W.

minikin-150w-02You will found the authenticated secure code in the bottom of outer box, scratch it and enter your secure code in ASMODUS Authenticator page.

minikin-150w-04More technical specifications information you may refer on the back of outer box.

minikin-150w-06
The user manual and battery safety card was included.

minikin-150w-07The USB cable was include as well for the battery charging and also the future software upgrade.

minikin-150w-08Same build quality and the durable battery sled which hold 2 battery (18650) secure and perfectly.

minikin-150w-05The same high quality Zinc alloy body construction with comfortable rubberized coating, which is another durable part. You will also found the USB port on the side of MINIKIN 150W, for charging battery internally and future software upgrade use.

minikin-150w-021The gap between mod body and battery cover seem improved a lot, now almost seamless.

minikin-150w-011The display now able to show you 2 different battery level, which quite useful for let you define your battery healthy level in some point.

minikin-150w-013With five quick click on the fire button, you will able to enter to menu, in here you can choice POWER, TEMP and TCR to meet the coils on your RDA or RDTA.

minikin-150w-014A lot of different wire profile you are able to choice.

minikin-150w-015It nearly support full range or wire in market, we are not even able to complete all kind of different type wire as the MINIKIN 150W got too much selection.

minikin-150w-016As usual you are able to adjust the screen brightness too.

minikin-150w-019The last but not least, have a look on the new MINIKIN 150W and the old MINIKN 120W, it look identical but slightly different, the most important is the USB port and the improvement of “Gap”.

— Conclusion —

We are totally surprise of this new MINIKIN 150W, not just only the improvement and USB port, the acceptable wire range is just ridiculously awesome! You can use almost full range of wire in the market in this device, even we don’t think it is necessary to have such many different wire profile in this device, but ASMODUS just prepare the function for you! The added USB port is not simply for charging, it is also use for future upgrade on software as well, we are looking forward of it.

ASMODUS also going to release the Stabilized Wood Edition of this MINIKIN 150W soon, they named Minikin Kodama Edition 150W, visit the link below the picture to place your pre order now!

minikin-Kodama
asMODus Minikin Kodama Edition 150W

 

— Purchase Information —

Website: www.asmodus.com

For General Questions:
Address: 15962 Downey Avenue, Paramount, CA 90723
Please Call: (562) 408-0888 Or email us: warranty@asmodus.com

icon-facebook icon-instagram

!! WARNING !!
E-LIQUID CONTAINS NICOTINE WHICH IS BOTH HIGHLY TOXIC AND VERY ADDICTIVE. KEEP WELL AWAY FROM CHILDREN AND PETS. E-LIQUID IS ONLY INTENDED TO BE USED WITH YOUR ELECTRONIC CIGARETTES, E-CIGS, E-CIGARS, E-PIPES OR VAPORIZERS. NOT FOR SALE TO ANYONE UNDER THE AGE OF 18.

Recently ASMODUS just released the new Minikin V1.5 which is in 150Watt and all range support on temperature control wire! Before we have a close look on this new Minikin v1.5, let we talk something of the incident of Minikin v1. The story actually is quite short to understand, ASMODUS Minikin v.1, Helve and Snowwolf 75W was contract manufacturing in China, after the hot selling of ASMODUS product on worldwide market, the manufacture in China decide to production the extra ASMODUS products and selling in the market. ASMODUS has the full Copyright of their products in USA, however not in China, the trademark…

SMASH VAPE RATING

DESIGN & BUILD QUALITY
DEVICE FEATURE
PERFORMANCE
USER FRIENDLY
PURCHASE VALUE

SUPERB!

The new ASMODUS MINIKIN V1.5 TC 150W is was absolutely must get items! No matter the price or the build quality, even the user friendly menu control, from beginner to advanced vaper, ASMODUS ensure you will fully satisfied! Highly recommended!

Check Also

Asmodus Ohmsmium 80W TC Box Mod Review

The Ohmsmium, powered by the GX-80-f Chip, is a new box mod that is built …

ARE YOU READY? SUBSCRIBE NOW!
Get our latest news & awesome GIVEAWAY!
Your Information will never be shared with any third party.
PGlmcmFtZSBzcmM9Imh0dHBzOi8vd3d3LmNsaXAuY29tLm15L2NsaXBwLyIgZnJhbWVib3JkZXI9IjAiIGFsbG93ZnVsbHNjcmVlbj48L2lmcmFtZT4=